Hiii Frndzz,
This Is Ds Chauhan ......
Today m here With One Of The Best Tweak Availble For A Rooted Android Phone.
This Tweak Works With Most Of Android Rooted Phones Even On Galaxy Gear :)
This mod is applicable only for
stock and stock based custom
roms...
dont try it on cm/aokp.
SUPPORTED DEVICES:
ALL ROOTED
ANDROID DEVICES RUNNING STOCK
OR STOCK BASED ROMS [GB+]
yeah u heard it right.. :P
all Gingerbread+ devices...
2.3+ support
Dont try it on cm or aokp or aosp
Features:
- Greatly increases the score
AnTuTu
- Radically improved management
of ram(Using Hard Multitasking
Tweak)
- Improves a lot the graphics
(found a new way to integrate
bravia engine parts in mod)
- Scan multimedia time drastically
reduced
- Network Improvements
- All SQlite database optimized
- Android performances improved
- Enable hardware features turned
off by default for a better
experience on entry level devices
- Cleans the system every 24 hours,
thecache every week and the Dalvik
every month
- Reduces the startup time of
Android
- Allows you to play ported games
without lags
- Automatically Zipalign on each
boot
- NEW BEATS AUDIO V2.0
INCLUDED (i havnt updated that
on my old thread of beats audio)
- New Enhanced LOOPY
SMOOTHNESS tweak (Much more
buttery smooth)
- V6 supercharger parts included
- Launcher loading is much faster
than before
- Boot time decreased
- Battery-
- The battery is calibrated on every
boot
- Drastically decreased the
drainage of battery
- Check the activities that consume
too much battery stop them
- When the phone is charging
reduces system services for faster
charging
- Improvements in build.prop
- Disable animation of the system
when the battery is nearly
exhausted
Graphics, Screen, Images & sound
- Enables a non-aggressive
dithering to save CPU
- When you lock the device, the
engine makes sure that the GPU is
turned off
- Enables deep sleepalso in the
bugged rom
- Parts of bravia engine
- Parts of CrossBreeder (credits to
dev)
- Parts of Adrenaline Engine
(credits to dev)
- Generates video entropy (like
seeder)
- V6 superchargerparts included
- Beats audio 2.0 added
CPU, Governors, I/O Schedulers
- Slightly improves the scaling of
the frequencies (for better results
u should try deviant or kuro kernel)
- Lightens the load on the CPU
switching the workload to GPU
rendering
- Enable the swap partition in
Android (experimental)
AND MUCH MORE.... xD
Directions to flash:
Plz perform a clean install by first using the uninstaller
1.-shutdown ur cell.
2.-press and hold volume up
button+home+power button.
u ll be on stock recovery now.
3.-flash cwm zip(GO TO CWM NOW)
4.-mount system and data
5.-flash the zip and reboot
ALL IN ALL U JUST HAVE TO FLASH
THE ZIP FROM CUSTOM RECOVERY
LIKE CWM..
NOTE : FIRST BOOT MIGHT TAKE
SOME TIME AND SOME USERS
MIGHT GET BOOTED TWICE. SO IT
WILL LOOK LIKE A BOOTLOOP BUT
IT ISNT.
if ur first boot is taking much
longer then just take out the
battry and reboot..
Do take a nandroid backup.
DOWNLOAD LINK:
VulpiX v3.1
VulpiX Uninstaller
Download link for Old versions:
VulpiX v3.0- Download HERE
<<<<<<<CHANGELOG>>>>>>>>
~~~~VulpiX 2.0 Changelog~~~~~
*new battery saving tweaks forked
from cyanogenmod..
battery life increased by 35%
approx
*new script to integrate the above
tweak into system as well as init.d
(already there)
*script to prevent filesystem
corruption..
*played with wpaconfig files too..
*much smoother than before..
*NEW RAM MANAGER(optimizes
ram much better than old hard
multi tasking one used in v1.0)
also dropes much lower than ever..
(my record- 72mb aftr clearing ram
{bloatwares removed})
*JB devices lag fixd..
*new tweak to disable some
useless sleepers to make phone
much more responsive without
affecting battery life
*.db files ant other database files
optimization for less consumption..
*removed some junk from beats
files..
*removed beats app due to some
compatibility issues.(conflicted wid
dspmanager)
*Tons of build.prop tweaks and in
older version these lines were not
getting added in build.prop so
fixed.
*BUSYBOX & INIT.D SUPPORTED
KERNEL IS REQUIRED FOR 2.0 and
above
*SINCE SEEDER IS INTEGRATED IN
SYSTEM SO EXTERNAL SEEDER
APPLICATION WONT WORK SO A
NEW APP FOR SHOWING ENTROPY
LEVEL
*If for some reason, your entropy
values aren't hovering around 4096
then the app most probably didn't
start automatically. You can try
and run it manually using:
Code:
su -c /system/etc/CrossBreeder/zzCrossBreeder FORCE
*since direct editing build.prop is
not recommended i have moved
build.prop tweaks to init.d file
which will b executed on every
boot in system(using setprop
method)
*ad blocker updated
* Modulate OS entropy levels for
lag reduction. The whole OS reads
either /dev/random or /dev/
urandom and both need entropy.
However this mod uses a
completely different, lightweight
and efficient random number
generator called Havege . This
sharply reduces cpu consumption
and corresponding battery life loss
compared to Seeder. It also does a
better job at keeping entropy levels
high hence your device is more
responsive. It doesn't run in a CPU
intensive loop either. The extend
queue functionality has also been
added to CrossBreeder. See here
for another rationale favouring
Havege compared to Rngd - (
http://code.google.com/p/csrng/ -
Look for the limitations.)
*Much more.. xD
cz i dnt remmember much.. srry..
~~~~VulpiX 3.0 Changelog~~~~~
*highly advanced updater script
*reworked on whole init.d(much
simplified and improved)
*new scripts added and did some
cleaning
*adblock source file updated
*much stabler than before
*new lageliminator script with
deeper integration of lmk values to
minimize/reduce lag upto its least
value
*seprate gpu rendring for 2D
operations
*new improved sleeper script
*battery calibrated automatically
when fully charged and rebooted
*improved touch screen senstivity
*new script for checking wifi idle
state and system hibernate to save
battery
*since some jb device are hard to
tweak and to change system core
values i have integrated some
tweaks in bin files and sysctl file..
*new bin tweaks and systcl tweak
*build.prop tweaks integration
fixed
*changed the default permissions
and order of all init.d scripts for
proper execution
*A NEW APP FOR DEVELOPER TOOLS
(mainly for advance users)
{i included that mainly for advance
GINGERBREAD user cz some
developer options are hidden in
GB, unlike JB}
*A NEW FEATURE OF CLEANING
INIT.D SCRIPTS BY SIMPLY
EXECUTING A FOLLOWING
COMMAND IN TERMINAL
EMULATOR-
Quote:
type- "su " (withut quotes) and
press enter
then type - " cleaninit " (withut
quotes) and press enter
it will clean init.d scripts..
(first mod to integrate init.d
cleaner within installer, a small
uninstaller. lol)
[BUSYBOX IS REQUIRED FOR THIS]
I thought to make it a complete
uninstaller but m damn too lazy..
will provide it separately..
*Battery life increased drastically!!!
~~~~VulpiX 3.1 Changelog~~~~~
*adblock fixed(reversed commit
from 2.0)
*new minfree values(now proper
supported by high end devices like
Galaxy Note 3 etc.)
*some cleaning in init.d scripts
*Development tools app removed
from installer.(Buggy app -_- ,made
background processes 0 )
*No need to mess with ADBLOCK
files or host files..
everything is fixed now..
Credits
zeppelinrox,ImbaWind
,Exit_Only,idcrisis,nicolassp,jeeko,ku
ro,jersey,charsi babu,and u all
people for using it..
Say Thanks To XDA member Nitzz For His Amazing Tweak
Official Thread
Or Join Him @FB HERE
Any Question ?
ASK ME
Great News --
Vulpix v4.0 is Cuming Soon :)
{ Ds Chauhan Guladi }
